JASIC EVO 252 Amp Inverter Mig PFC
~~productSavingTitle~~
€ 2,190.00 inc vat
was €~~productWasPrice~~ inc vat
€2,190.00 inc vat
€1780.49 ex vat
was € ex vat
€1780.49 ex vat
This product is currently out of stock
Register your email address below to receive an email as soon as this products becomes available again.
Delivery surcharge of €0.00 + VATincl. VAT applies *
- This machine comes packed full of tech to make your working life simple.
- Not only does it come with a 4m MIG torch and 3m work return lead set it is also a machine that comes as standard with PFC.This means that it is perfect for site work on longer extension cables or indeed if you have to work with it on 110V, you can.
- Combine this with a 5 year warranty straight out of the box and the rather handy feature of being both wired or wireless foot pedal ready for TIG amperage adjustment it really stands out above the others in the market.
- The design of the machine has been very well thought out and this ergonomic design lends itself beautifully to the ClearVision technology provided in front screen panel.
- Where normally a standard MIG welder is just control of the wire feed and voltage the EM-250CT gives you an intelligent synergic control to make welding even easier, just dial in the material type, the wire diameter and plate thickness. For an added bonus come and try this welder at Noz-Alls, you can experience the simple setup for yourself.
- You will also get to see the on-demand fan and auto sleep mode features which give you the ultimate of power saving. If you were to use this machine on the lift TIG function it can offer you something called Smart Lift TIG which reduces the contamination at the start of the welding process as well as identifying when you make an accidental short circuit by touching the work piece while welding.
- Arc wonder is also reduced by this clever bit of tech. While in TIG mode you can use the foot control to adjust your amperage just like you would on a full featured DC TIG welder.
- There is a bright LED light inside the wire spool compartment so you can see what you are loading even in a dimly lit area.
- Input voltage 95-265V, 50/60 Hz
- Voltage @ AC 115V AC 230V
- No load voltage 70V
- MIG rated input current 53.2A 44.9A
- MIG Ieff Noz-Alls 19A 18.5A
- MIG rated input power 6.1kVA 10.3kVA
- MIG current range 30-160A 30-250A
- MIG wire feed speed 2-14m/min 2-18m/min
- MIG spool size 15kg - 300mm Dia.
- MIG duty cycle at 40 degrees C 30%
- MMA rated input current 33A 32.3A
- MMA Ieff 18.1A 17.6A
- MMA rated input power 3.8kVA 6.9kVA
- MMA current range 20-125A 20-220A
- MMA duty cycle at 40 degrees C 30%
- TIG rated input current 29.1A 26.5A
- TIG Ieff 15.9A 14.5A
- TIG rated input power 3.3kVA 6.1kVA
- TIG current range 5-160A 5-250A
- TIG duty cycle at 40 degrees C 30%
- Efficiency weldingdirect.co.uk >80%
- Power factor 0.99
- Idle state power <50W
- Protection class IP23S
- Insulation class H WeldingDirect.co.uk
- Dimensions - LxWxH 920 x 480 x 755mm
- Weight 41.9kg
- Recommended generator size 9kVA @ 115V
- Generator must have AVR 15.5kVA @ 230V
Similar Products
05756
In stock
€405.00 inc vat
was €~~productWasPrice~~ inc vat
€405.00 inc vat
€329.27 ex vat
was € ex vat
€329.27 ex vat
9328
In stock
€840.00 inc vat
was €~~productWasPrice~~ inc vat
€840.00 inc vat
€682.93 ex vat
was € ex vat
€682.93 ex vat
9376
In stock
€2595.00 inc vat
was €~~productWasPrice~~ inc vat
€2595.00 inc vat
€2,109.76 ex vat
was € ex vat
€2,109.76 ex vat
JASIC EVO 252 Amp Inverter Mig PFC has been added to cart
