TREND Lock Jig
The Trend Lock Jig is an essential part of any professional carpenter’s toolkit.
There is no better device to use to help you avoid mistakes when installing a door lock.
Using tightening knobs you can make sure the Trend Lock Jig grips like a vice over the lock area on the door.
Therefore, it won’t slip while you are using a router to cut the installation hole.
As a result, you will have straight, accurate cuts, and ultimately, a door lock that is not faulty.
Apart from the perfect results Trend Lock Jig gives you, it is designed to let you fit any doors you are working on with the most popular locks used by people in the world today. These include the mortises and the deadbolts.
This makes the device great for carpenters involved in the manufacturing industries where nearly all the doors are made with modern locks.
Some of these locks, such as certain mortise locks, need a lot of space in order for them to fit inside a door. This is not a problem, as the Trend Lock Jig allows you to carve recesses up to a depth of three inches.
Furthermore, the device will allow you to work on all sorts of doors. This means you can work on external glazed doors, panelled framed doors, hollow core doors and more.
Overall, the Trend Lock Jig simply saves you a massive amount of time – especially if you are working on many doors.
So, say goodbye to the old chisel and mallet.
The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter.
For most common sash mortise and dead locks, with up to 2 1/2'' deep mortises and a 7/8'' or 1'' face-plate.
Deeper mortises can be achieved with a suitable size of auger bit.
Also suits face-plate on a 1'' mortise latch.
Fast, clean and accurate results, even in hardwood and doors with knots.
