ABAC AIR DRYER 30CFM DRY60

Sizing a Dryer

• You need to match the volume (cfm - l/min) of the compressor to the flow of the dryer.
• Rule of thumb when selecting, you can go bigger, but never smaller, if the air volume is too large, the dryer cannot reduce the air temperature down

Water Contamination

• Due to there being moisture in the air, there will be moisture in your air system.
• Heat is generated during compression and to make things simple we can say that the moisture is vapour (steam) when in this state the vapour will bypass to a large degree any filters you put in your system
• What we require is condensation to take place by cooling, to some degree, due to tanks being a large surface area, this can happen there, and a simple filter installed, but if the air flow is constant, then another way is required that is more efficient, this is when you require a refrigerant dryer, especially when paint spraying, or running CNCs, this is just like your home fridge, but instead of keeping your food cold, it reduces the air temperature to 3-5 degrees ambient, once the vapour becomes a solid matter i.e. water droplets, it can be removed by a filter
•  Todays compressed air production process is not only a matter of producing air, but also of confirming with defined purity criteria. , Refrigerant dryers are the right solution to remove condensate and continue efficiency.

 Benefits 

• Longer lifetime of your equipment and distribution network due to less wear
• Better productivity and lower maintenance costs thanks to less breakdowns
• C.F.M @ 3 degrees 30 cfm
• C.F.M @ 5 degress 35 cfm
• LED Display, dew, alarms, status
• Energy saving with lower pressure drops
• 12 months Warranty
• Inlet - Outlet 1/2 or 3/4 Bsp Male
• Digital Display
• Power Supply - 240 volt
• No Loss Electric Drain
• Dimensions L350 x W500 x H450mm
• Weight 20kg